Pre-installation requirements for the SSA Baan ERP 5.0c Localizations2.1 for Italy and Nordic
This document is applicable in case you want to install the first PMC solutions forSSA Baan ERP 5.0c Localizations2.1 for Italy and Nordic.
Perform following steps to have the update VRC generated for the SSA Baan ERP 5.0c Localizations2.1 for Italy and Nordic:
1 Start the ‘Generate Update VRC structure’ (ttpmc2240s000) session. Enter the fields like depicted in the screenshot below and press the ‘Generate’ button. The system will now start generating an update VRC B50U_c_eme0 derived from the B50L_c_eme0 VRC.
Note: It is important to make the contents of all the fields 1, 2, 3 and 4 empty in the screen above. In case you don’t make them empty, you can get the blocking message ‘Customer fields must be different’
2 During the generation process questions will come up like depicted below. Answer these questions with ‘Yes’ or ‘Yes to all’
3 Once the generation process has been completed, check the update VRC’s in the ‘Update VRC’s’ (ttpmc2140m000) session. The update VRC’s should look like depicted in the screenshot below.
4 Run the ‘Create Runtime Data Dictionary’ (ttadv5210m000) session. Use settings like depicted below. The Package Combination range in the screenshot below is fully open. To reduce processing time, it is recommended to include in this range selection only your package combination(s) for SSA Baan ERP 5.0c Localizations2.1 for Italy and Nordic. In the ‘Packages by Package Combination’ (ttaad1121m000) session you can see which package combinations are present for SSA Baan ERP 5.0c Localizations2.1 for Italy and Nordic.
5 Activate B-language support by means of the B-Languages by Update VRC (ttpmc3101m000) session. This is needed in case you are using SSA Baan ERP 5.0c Localizations2.1 for Italy and Nordic in languages other than US-English. The screenshot below gives an example for Italian: